Bose QC15 Adapter Cable Replacement Guide

Quick answer

Replace your Bose QC15 adapter cable by purchasing the correct 6-inch charging cable (adapter sold separately) and following a simple swap procedure.

Step-by-step replacement guide

1. Identify the correct cable: Check that the replacement cable is the 6-inch charging cable for the QC15 adapter. The adapter itself is sold separately, so confirm you still have the adapter unit. Common mistake: buying a cable that is too long or for a different model. Stick to the QC15-specific 6-inch cable.
2. Remove the old cable: Gently unplug the old cable from both the adapter and the headset. If the cable is stuck, use a small flat tool to pry it loose, but avoid pulling on the wire itself. Checkpoint: inspect the adapter port for debris or damage before inserting the new cable.
3. Connect the new cable: Plug the new cable firmly into the adapter and then into the headset. Ensure the connection is snug but not forced. Common mistake: not fully inserting the cable, which can cause intermittent charging or audio issues.
4. Test the connection: Turn on the adapter and check that the headset powers up and pairs correctly. If it does not, re-seat the cable at both ends. Checkpoint: if the headset still does not work, the issue may be with the adapter or headset, not the cable.

Product facts

• Bose QC15 Adapter Cable (Adapter not included) - Encased: Authentic charging cable for the QC15 wireless adapter, 6 inch cable length, adapter not included. This cable is a direct replacement for the original, so you can restore charging without modifying the adapter or headset.